body piercing equipment
Body Piercing Jewelry
All Prices Are In
Canadian Dollars
$$ Canadian $$
For Quick Shipment
ORDER TOLL FREE
In North America
1 877 466-8047

We Accept
COD in Canada
Direct Bank Transfer

Visa_Mastercard

window sign
Store Hours
Eastern Standard Time

Regular Hours:
Walk in
Monday to Friday
12 Noon to 9 PM

Saturday
12 Noon to 6 PM


Phone Orders:
Monday to Friday
12 Noon to 9 PM

Saturday
12 Noon to 6 PM


Irregular Hours:

If I'm in the office working I'll pick up anytime
.


Tattoo Machine Parts
We carry a good selection of everything you need in tattoo machine parts for doing your own equipment repairs. From electrical parts to Quick Change Machine Frames we have everything in stock and ready for quick shipment.
We also repair and tune tattoo guns.

One piece of advice I'd give every tattooist is have a spare set of springs because they only break at two o'clock in the morning on a Sunday.
The secret of tuning a coil machine is to put a bend on the back spring.
Look at the back spring in this picture. Notice the small bend upwards on the back spring.
This is critical to making a coil machine run strong. You must make a small bend like on the spring in the picture.
When you get a back spring it will be straight. You must make a small bend to create tension. When the magnetism of the coils overcomes the tension in the spring it will snap down.

The easiest way to put a bend in your spring is to loosen the back post screw and turn the armature bar and spring around so you can pry up against the screw.
Metric Tattoo Machine Repair Kit $29.95
metric tattoo machine repair kit
Spaulding with SAE Thread Tattoo Machine Repair Kit $48.95
LeeverLoc Kit

#1080B $13.95
LeeverLoc Lightweight Kit

#1080C $13.95
Fits Lightweight Tattoo Machines Only
tattoo machine light
Tattoo Machine Light
Put a little light on the matter
Attaches easily

$8.95
Brass
Contact Screws

brass contact screws
6/32" 8/32" $1.95
Silver
Contact Screws

silver plated contact screws
NMA34S 8/32" x 1"
MA34S 6/32
" x 1"
$9.95 Each
Nickel Plated
Contact Screw

nickel plated contact screw
6/32" $6.95
Sterling Silver Contact Screws
Sterling silver contact points
#CS10 Skull Silver Contact Screw
jaw actually moves
$25.95 Each


 

Contact Screw
contact screw and points
Contact Screw and Points

#1058
Sterling Silver Contact Screw 6/32" threads x 1" long
$9.95

#1059
Sterling Silver Contact Points - tattoo machines run smoother 12 pieces per pack $9.95

O rings

10 pack Nylon Beads
prevents contact screw damage
$1.95

10 pack Medium "O" Rings for springs
$1.95

Tattoo Machine Rubber Bands
rubber bands
#1040 Tattoo Machine Rubber Bands

One quarter pound bag of #12 rubber bands. Made in the U.S.A. of pure rubber, these bands are the CORRECT SIZE for all tattoo machines.
Band tension is very important for proper needle bar adjustment.
1/4 lb bag $6.95 - Small Bag $1.95


Top Row Left to Right
FRONT BINDING POST BP-1 $7.95 Each FRONT BINDING POST BP-2 $6.95 Each CONTACT SCREW CS-1 $3.95 Each CONTACT SCREW CS-1 $3.95 Each CONTACT SCREW CS-3 $3.95 Each
Bottom Row Left to Right
TUBE TIGHTENER TLT $5.95 EA TUBE TIGHTENER TLG $5.95 EA SCREW CSS $0.75 EA SCREW CSS
$0.75 EA
SCREW GRS
$0.75 EA
SCREW TUS
$0.75 EA
armature bar

#1084 Armature Bar $8.95
Nickel plated fits all standard make machines uses 8/32" x 1/4" screw.
CSeries Armature Bar $5.95
N Series Oversize Armature Bar $9.95 not shown
#1083 Yokes $8.95

Nickel plated, for use under coils on bronze or aluminum frames to properly conduct current.
CSeries Yoke $5.95

Stinger armature bar
#1056ST Armature Bar $8.95

Shorter than standard armature bar to fit:
Stinger, Wolverine and Reaper tattoo machines

 
RCA clip cord
RCA Adapter and Cord $12.95
Binding Posts
back binding post

#1057 Back Binding Post
Fits Lightweight Puma and Puma Quickchange $5.95
#1057A Back Binding Post
Fits Supreme, Supreme Deluxe and Supreme Quickchange $5.95
#1056 Front Binding Post
With Silver Contact Screw $15.95

 
tattoo machine binding posts
Front Binding Post
With Contact Screw BP-3 $7.95
Back Binding Post
BP-6 $5.95
N Series Tattoo Machine Binding Posts
tattoo binding posts
NMA33S Binding Post Set Up
This Binding Post set-up comes complete with a Stainless Steel 8/32" x 1/2" long hex screw, insulators, connectors, contact locking screw and a large 8-32 (thicker) nickel contact screw.
$16.95
MA33 Binding Post Set Up
Comes complete with a binding post, an 8/32" x 12 long hex screw, insulators, connectors, contact locking screw and a large 6-32 nickel silver contact screw.
$14.95
MA33D Binding Post Set Up For Deluxe Tattoo Machine
Same as MA33 but with a slightly shorter post for Deluxe Machines
$14.95
MA33A Rear Post Set Up
Comes with an 8/32" x 1/2" binder head screw, insulators and connector brass plated lug post.
$5.95
NMA33A Stainless steel Rear Post Set Up
Comes with an 8/32" x 1/2" binder head screw, insulators and connector and Stainless Steel lug post.
$5.95
Tattoo Machine Hardware
tattoo machine parts
screws bolts

Chrome Plated Quick Change Frames
A B C D and E -
$149.00 F - $198.00
Quick_change_Frames

Tattoo Machine Springs

tatto machine springs
Spaulding Tattoo Machine Springs
Spring Sets With Contact Points $8.50
Spring Sets NO Contact Points $7.50
Front Springs WITH Contact Point $4.95
Front Springs With NO Contact Point $3.95
#1049 One Piece Spring $6.95
Back Springs $3.95
tattoo machine springs
NMA29 Old Style Heavy Duty Springs 1/2" x 1 9/16" x .020 Gauge NO Contact Point $3.95
NMA30 Old Style Heavy Duty Springs 1/2" x 1 9/16" x .020 Gauge WITH Contact Point $4.95
RS20 Old Style Heavy Duty Back Springs 1/2" x 1 7/16" x .020 Gauge $3.95
MA79 Old Style Lightweight Springs 9/16" x 1 3/4" x .020 Gage NO Contact Point $3.95
MA84 Old Style Lightweight Springs 9/16" x 1 3/4" x .020 Gage WITH Contact Point $4.95
RS20P Old Style Lightweight Back Springs 9/16" x 1 7/16" x .020 Gage $3.95
SHMA86 New Style Heavy Duty Springs Short Front NO Contact Point $3.95
SHMA35 New Style Heavy Duty Springs Short Front WITH Contact Point $4.95
SHR43 New Style Heavy Duty Short Rear (frame side) NO Contact Point $3.95
SHMA83 New Style Lightweight Long Front NO Contact Point $3.95
SHMA34 New Style Lightweight Long Front WITH Contact Point $4.95
SHR42 New Style Lightweight Long Rear Spring (frame side) $3.95
Apollo Front and Back Springs for Apollo, Ironstar and Strongman machines $3.95 each
SETS Both Front and Back Springs With Contact Points $8.50
SETS Both Front and Back Springs NO Contact Points $7.50
Springs With Rivet Contact Points

The contact points are made of extra thick heavy duty rivets for longer lasting use. They're very sturdy and won't pop off. This type of contact point is good for those of you who run your tattoo machines hard and fast.

SHMA30 Front Spring with rivet contact point LONG Thick - .020
$4.95
SHMA31 Front Spring with rivet contact point SHORT Thick - .020
$4.95
SHMA34 Front Spring with rivet contact point LONG, Medium - .018
$4.95
SHMA35 Front Spring with rivet contact point SHORT, Medium - .018
$4.95
SHMA32 Front Spring with rivet contact point LONG, THIN - .015
$4.95
SHMA33 Front Spring with rivet contact point SHORT, THIN - .015
$4.95
SHR21 Rear Spring LONG Thick - .020
$3.95
SHR22 New Style Lightweight Long Rear Spring (frame side)
$3.95
SHR42 Rear Spring LONG Medium - .018
$3.95
SHR43 Rear Spring SHORT Medium - .018
$3.95
SHR23 Rear Spring LONG THIN - .015
$3.95
SHR24 Rear Spring SHORT THIN - .015
$3.95
Spaulding Deluxe Tattoo Machine Coils
All Deluxe coils are wound with #24 enamel wire
8 Wrap $22.95
10 Wrap $24.95
One Coil $13.95

The coil is an electro magnet. It was patented by Thomas Edison.

The coil consists of thin #24 wire being wrapped around a steel core. The steel core is simply a short piece of steel rod with a 8/32" hole drilled and tapped in one end. The steel core increases the magnetism the copper coil makes. Ther are no moving parts in a coil. Coils will last forever as long as you don't break a wire or bang it so 2 wires get scored and touch. There are 12 wrap, 10 wrap, 8 wrap and 6 wrap coils. I find 10 wrap and 8 wrap the most practical.

tattoo machine coils

Spaulding Deluxe Fishscale Coil Covers
1 Pair SOT51 $2.95
coil covers
Spaulding Pre-Wired Coil Kits
#3128 8 Wrap Black $29.95 #3130 10 Wrap Short $33.95
#3129 10 Wrap Black $29.95 #3131 10 Wrap Red $33.95
prewired tattoo machine coils
N Series Coils
MA24 Heavy Duty Coils
Core: 1 1/4" long, x 5/16" diameter 8-32 thread
Diameter of coil: 13/16"
Weight per pair: 3 3/4 oz Covering
: Covering: Blue iridescent
10 Wrap One coil $13.95

$24.95 per pair
EMA25 One inch Coils
Core: 1" long, x 5/16" diameter
8-32 thread
Diameter of coil: 13/16"
Weight per pair: 2 3/4 oz

Covering: Blue iridescent
10 Wrap

One coil $13.95

$24.95 per pair

 

NMA24 Light Weight Coils
Core: 1 1/4" long, x 5/16" diameter
8-32 thread
Diameter of coil: 3/4"
Weight per pair: 3 oz

Covering: Silver iridescent
8 Wrap One coil $13.95

$24.95 per pair
EMA24 One inch Coils
Core: 1" long, x 5/16" diameter 8-32 thread
Diameter of coil: 3/4"
Weight per pair: 2 1/8 oz

Covering: Silver iridescent

10 Wrap One coil $13.95

$24.95 per pair
MA25-8
Core: 3/8" long, x 1 1/4" diameter
Red
8 Wrap $34.95 MA25-6
Core: 3/8" long, x 1 1/4" diameter
Gold


8 Wrap $34.95
Premade Coils With Capacitor
PMA24
10 Wrap 1 1/4" 5/16" core $34.95
PEMA25 10 Wrap 1" 5/16" core $34.95
PNMA24 8 Wrap 1 1/4" 5/16" core $34.95
PEMA24 8 Wrap 1" 3/8" core $34.95
3131-10 10 Wrap Red   $33.95
3129-10 10 Wrap Black   $29.95
3128-8 8 Wrap Black   $29.95
3130-10 10 Wrap Short   $33.95
tattoo machine coils
C Series 12 Wrap Coils
These are fat coils and do not fit the standard sized frame.
12 wrap coils
Frames may have to be adjusted to make them fit.
$29.95
C Series Premade
10 Wrap Coils 1.25"
These replacement coils fit standard size frames.

$18.95
Capacitors
Capacitors are used on Tattoo Machines to reduce the spark and give a smooth current reducing wear on the points and contact screw. Generally the higher the UF number, the slower the tattoo machine will operate. When I began tattooing machines did not have capacitors. A capacitor is not necessary to a tattoo machine's operation. The main difference you would find if your machine had no capacitor is the spark between the contact screw and spring would be bigger and the machine would actually run stronger. When you use silver contact points on the spring the spark looks greenish. When you use a steel contact spring the spark is blueish. This is of no importance, just an observation.
#1060 - 10 MFD 35 Volt, standard on all Spaulding & Rogers DC Tattoo Machines
Can Be Used On Any Other Tattoo Machine
$3.95 each
10 MFD capacitors are for outliners and 47 MFD are for shaders.

capacitor
#1060B - 47 MFD 50 Volt, standard on all Spaulding & Rogers DC Tattoo Machines
Can Be Used On Any Other Tattoo Machine $3.95 each

The higher the UF number, the slower the machine runs.
#MA48 - 10 UF 50 Volt

#MA49 - 22 UF 35 Volt
Good For Outliners
$2.95 each

capacitor
#MA50 - 47 UF 35 Volt
#MA100 - 100 UF 25 Volt
Good For Shaders
$2.95 each
© Copyright Studio One 2008 - 2014