body piercing equipment
Body Piercing Jewelry
All Prices Are In
Canadian Dollars
$$ Canadian $$
For Quick Shipment
ORDER TOLL FREE
In North America
1 877 466-8047

We Accept
COD in Canada
Direct Bank Transfer

Visa_Mastercard

window sign
Store Hours
Eastern Standard Time

Regular Hours:
Walk in
Monday to Friday
12 Noon to 9 PM

Saturday
12 Noon to 6 PM


Phone Orders:
Monday to Friday
12 Noon to 9 PM

Saturday
12 Noon to 6 PM


Irregular Hours:

If I'm in the office working I'll pick up anytime
.


Tattooing Power Equipment
tattoo power box
It's amperage that makes a machine run hot. It doesn't hurt them to run hot but a power box should not be over 3 amps.
When I started tattooing power boxes did not have meters, digital display, memory or the ability to operate two machines. All these things are nice but completely unnecessary. What is necessary is your ear. When the machine sounds smooth it is smooth. To set the power don't look at the numbers or even look at the machine. Close your eyes and listen as you turn the knob up and down on the power box. You will soon hear the sweet spot, forget the numbers, hear it. I find machines run best between 9 volts DC and 12 volts DC depending on the tension you put on the back spring. Personally I always put a bend on my back spring and use 12 volts DC to overcome the tension. My machines run very strong.

To test that your machine is running strongly, gently press your thumb against the armature bar. If it continues to buzz it's plenty strong enough to drive a tiny pin into the skin.
In the early years of tattooing before hydro was common 12 volt D.C. dry cell batteries were used to power tattoo equipment. This allowed tattooists to operate at fairs and carnivals even if electricity wasn't available.

PS 200 Combo
Dual Machine Power Supply
Precise Voltage Adjustment
1.2 Volt - 18 Volt
3 Amp
Comes with FS 22 footswitch and CCAS clipcord
$110.95

The Coffin Power Box P57
Comes with Clip Cord and Foot Switch
$110.95

Lite Tote Power Box P18
Comes with clip cord and foot switch
$69.95
Tattoo Gun13
Spaulding Heavy Duty Power Box
USA Military Spec Parts
EXTREMELY TOUGH
Will last a lifetime

For Coil Machines ONLY
Comes with clip cord and foot switch $220.95

National Commander
US Made Heavy Duty Power Box
Comes with clip cord and foot switch
A blast from the past excellent performer - catch a buzz

$265.95
AC Adaptor for cosmetic tattoo guns
N Series Digital - Power Box P12
Comes with clip cord and foot switch $99.95
Tattoo Gun29
Spaulding Power Unit II
For Revolution Guns Only With Treadlite Foot Switch $355.00

Revolution 6 ft Connecting Cord
Comes with clip cord and foot switch
$9.95
power box for tattos
H-P2 Digital Power Box P50
Runs 1 Machine Only
Full Digital PWM Control Comes with Clip Cord and Foot Switch $108.95
Tattoo Gun11
Spaulding DC
Compact Power Supply With
5 ft Clip Cord and Foot Switch
$147.95

5 ft Clip Cord $26.95

8 ft Clip Cord $27.95

Foot Switch $30.95

power box
DC Digital Power Box P11
Unique 3 jack system lets you change from outliner to shader at the flip of a switch
Comes with clip cord and foot switch $79.95

foot switch
C Series Digital Power Box P07
Comes with clip cord and foot switch
$68.95
 
If your power box puts out high amperage and your machine tends to run hot you can protect your hand by simply running a band-aid along the bottom of the frame. This will protect your hand from touching the hot frame directly.
Clip Cords and Footswitches
Machines run on direct current.
This means it doesn't matter which way you attach the clipcord, the machine will run.

Clip Cord CC-C8
RCA 100% Soft Silicione
8 foot long 22 AWG wire
$12.95

Clip Cord CC-A8
Springless 100% Soft Silicone
8 foot long 22 AWG wire
$12.95
clip cord
RCA Adapter and RCA Cord C05 1/4" Jack
$12.95

FS-22
Non Slip Rubber Pad
Highly Conductive Brass Points
Rubber pad prevents it from sliding away from your foot
$15.95
Tattoo Gun7 Studio One Clip Cord 1/4" Jack $8.95
Studio One Clip Cord 2 Prong $8.95
Spaulding 2 Prong 5 ft Clip Cords $26.95
Spaulding 2 Prong 8 ft Clip Cords $23.95
Spaulding 2 Prong 8 ft Extension Cords $16.95 (not shown)
National 5 ft Clip Cord 1/4" Jack $24.95
National 8 ft Clip Cord 1/4" Jack $28.95
National 15 ft Clip Cord 1/4" Jack $36.95


Premium Foot Switch FS13

2 Meter Length of 18 gauge Silicone Wire Pressure sensitive pre-set from any direction Nickel chrome cover finished Stainless Steel Pedal, Non-Slip Rubber Pad
$26.95


FS33 Celtic Cross Wing Foot Switch $21.95
1.8 Meter Length of 22 gauge Silicone Wire Pressure sensitive from any direction Old School cover finished Aircraft Aluminim Pedal, Non-Slip foam Pad
Tattoo Gun12
C Series F01
5 ft Foot Switch 1/4" Jack $9.95

Treadlite 5 ft 1/4" Jack Foot Switch $28.95

Treadlite 10 ft 1/4" Jack Foot Switch $34.95

1008
2 Prong Foot Switch for the Spaulding Heavy Duty Power Box $23.95

clip cord
Clipcord For Spaulding Compact Power Supply
For use on coil type machines. Made with 18-2 plastic coated wire, nickel plated spring, s/s hooks and adapter jack to fit the DC compact power supply
#3084A 5 foot cord $29.95
#3084B 8 foot cord $32.95
Tattoo Gun8
Gem Foot Switch 1/4" Jack $51.95

Gem Foot Switch 2 Prong
$51.95

Foot switch
Treadlite Foot Switch
For Spaulding DC Compact Power Supply

Light and compact, comes standard with the DC compact power supply. footswitch is prewired with a 5 foot cord of 18-2 plastic coated wire, with adapter jack to fit DC power supply #3084C $31.95
 
© Copyright Studio One 2008 - 2014